Here’s a reminder that you can submit photos of your hotel room to law enforcement, to assist in tracking down CSAM producers. The vast majority of sex trafficking media is produced in hotels. So being able to match furniture, bedspreads, carpet patterns, wallpaper, curtains, etc in the background to a specific hotel helps investigators narrow down when and where it was produced.

https://traffickcam.com/

The youngest Playboy model, Eva Ionesco, was only 12 years old at the time of the photo shoot, and that was back in the late 1970’s… It ended up being used as evidence against the Eva’s mother (who was also the photographer), and she ended up losing custody of Eva as a result. The mother had started taking erotic photos (ugh) of Eva when she was only like 5 or 6 years old, under the guise of “art”. It wasn’t until the Playboy shoot that authorities started digging into the mother’s portfolio.

But also worth noting that the mother still holds copyright over the photos, and has refused to remove/redact/recall photos at Eva’s request. The police have confiscated hundreds of photos for being blatant CSAM, but the mother has been uncooperative in a full recall. Eva has sued the mother numerous times to try and get the copyright turned over, which would allow her to initiate the recall instead.

1. This hasn’t been a notable issue in a while. That’s why Plex’s https-by-default was such a big deal. With https, even your ISP can’t see what you’re streaming. They can see that something is being streamed, but not what specifically.

Also, you totally glossed over the fact that Plex is simply easier for non-savvy people to set up. Plex provides a unified login experience similar to major streaming services, which Jellyfin simply can’t provide; If your mother-in-law can figure out how to log into Netflix on her TV, she can figure out how to log into Plex too.

And the unfortunate truth is that Plex’s remote access is much easier for 90% of users to figure out. It doesn’t require VPNs or reverse proxies at all. You just forward a port and anyone with access can easily see your server. But my MIL’s TV doesn’t even have access to a Jellyfin app without sideloading. Not to mention the fact that I’d need to walk her through actually setting the app up once it is installed, because there is no unified system for logging in. And if I’m not using a reverse proxy for my Jellyfin server, then I also need to walk her through setting up Tailscale, assuming her TV is even capable of using it at all.

Any single one of those hurdles would make Jellyfin a non-starter if I want to walk my MIL through the setup over the phone, and they’re all currently present. And some of them will never be fixed, by design. For instance, the lack of a unified login page is by design, because a unified login would require a centralized server for the app to phone home too. That centralization is exactly what Jellyfin was made to rebel against, so it’s a problem that will never be “solved”; It is seen by the devs and FOSS enthusiasts as a feature, not an issue.

From a FOSS perspective, Jellyfin is a modern marvel. But it’s definitely not at the same level as Plex when you compare ease of setup or remote access. Jellyfin is fine if you’re just using it locally, or are willing to run Tailscale to connect back to your home network. But if you’re looking for true seamless remote access and need to consider the mother-in-law factor, then Plex is hard to beat.

And yet you know damned well what they meant, otherwise you wouldn’t have responded with the “well akshually” type of comment.

To be precise, that’s a cogwheel. There are six cogs around the cogwheel in your image. The word “cog” refers specifically to the teeth around the wheel, not the wheel itself. The cogwheel may be colloquially called a cog, but it’s technically inaccurate; If you told a watchmaker that their watch was missing a single cog, it would have a very different meaning than if you told them it was missing a single cogwheel.

It’s splitting hairs, but that would technically be a cogwheel. The actual cogs would be the teeth around the wheel.

If you have a cogwheel with a broken cog, it would be accurate to say “the cogwheel is missing a cog.” That doesn’t mean the entire wheel is missing from the system; The system is only missing a single tooth.

It depends on which app you’re using. Voyager displays it out to 30 days, IIRC. But I think you can also configure that somewhere in the settings. I recently made this account after being here for over a year, so it’s amusing seeing the baby face next to my own comments.

If you do, I’d love to seed it. I’ve been looking for good copies of this for a while.

I have struggled to find good downloads for a lot of the older stuff. Looney Tunes and Tom & Jerry both come to mind; I’d love to have them on my server, but haven’t had the time to drive all the way to my parents’ place to get my old DVDs to rip. And even if I did get the DVDs, there’s a non-zero chance that they’re rotted. So I tried downloading them, but finding properly seeded torrents for content that old has been a struggle.

There are systems that will use a hidden hyperlink (which only a bot would see and use) which directs them to an infinitely long/wide junk link tree. It means they end up trapped in bot-purgatory and stop crawling the rest of your site.

The issue is that it means you end up consuming resources just to keep the bot trapped.

This is the worst way to go about doing it, because you should never assume a drawing is made to scale unless it is specifically marked as such. A protractor would be useless if the drawing isn’t to scale. Generally speaking, if a problem isn’t drawn to scale, it’s because all of the info you need to solve it is already present in the drawing. You don’t need to bust out the protractor to measure angles, because the angles can either be calculated from the available info, or aren’t needed in the first place.

Mozilla could remain funded if they stopped doing things like paying the CEO seven million dollars per year while laying off employees. If Mozilla dies, it will 100% be because of corporate greed.

Oracle bought (and quickly killed) it. It’s not under active development, and anything that claims otherwise is likely malicious. LibreOffice is a lot of the original OpenOffice devs who got fed up with the way things were going, and jumped ship.

Welcome to the biggest rabbit hole of your life. Syncthing itself isn’t huge, but the capacity to divest from the big cloud providers is. I say it’s a rabbit hole because you’ll quickly be finding new ways to use it.

This is how it works in Germany. Lots of their water bottles are made of glass, and end up with textured/worn rings along the bottle; The rings are from where it goes through the recycling machines to get prepped for the next use. The rings mean the bottle has been reused a lot, and has gone through the machines enough to get slightly worn.

Calibre doesn’t natively support reading DRMed files, but there are anti-DRM plugins which are trivial to install. You need to provide a legitimate Kindle serial number for Amazon DRM, as it uses that to de-encrypt the files. When you add the file(s) to your library, the plugin automatically runs as a file conversion. It basically converts it from a DRM-locked .epub/.azw3 to a DRM-free .epub/.azw3 instead. Since Calibre already has file conversions built in, the plugin simply uses that existing system to spit out a DRM-free version of the same file, then it adds that to your library instead.

Even better, wear loose generic clothes like a long black skirt and a baggy long sleeve shirt.

Investigators can narrow down suspects by using security footage to measure things like femur or forearm length. Baggy clothes make this much harder to do, because you can’t see exactly where the joints are. It introduces a lot of reasonable doubt that your defense lawyer can use to tear apart any video evidence they present.

I personally prefer tools that exist in the fourth dimension. It really makes blind-hole taps a thing of the past.

You can disable the streaming completely if you really want to. It’s in your preferences, under the “Online Media Sources” section. You can disable it for only managed users, or disable it completely if you don’t even want access to it via the admin profile. Or just move it farther down the list, or hide it completely by unpinning it as a source.

Because running it on your router gives you access to the entire network of devices, not just the Jellyfin server.